Hallmark Industries Well Pump Reviews

If you are looking for a deep well submersible pump, you may get confused quite easily. There is a lot of things you need to know when you are trying to find a pump for your well. The most important things you have to keep in your mind are the wellhead, pressure settings, size of the well, etc.

In this article we will particularly provide you details about hallmark industries well pump review. We will let you know why you should choose a deep well pump. And also, if Hallmark Industries MA0414X-7A is the pump you are looking for.

How to Choose a Deep Well Pump?

You cannot choose a well pump based on horsepower alone. The main things you should keep in mind is the head and pressure setting. Head is measured from the top surface of the water to the top of the well. In other words, it is the depth of the water surface from the top of the well. The pressure is controlled via the pressure tank switch. The normal pressure settings are 20/40, 30/50, 40/60 psi(pound per inch). With these two information, you can choose if the pump is right for you.

The formula is (highest pressure number * 2.307) + well’s head. Suppose your well’s head is 100 feet, and the pressure setting is 20/40. So (40 * 2.307) + 100 = 192.28 feet head. The 1/2hp pump can handle up to 154 feet, 1hp is 207 feet, and 2hp is 400 feet. So for this example, we need a 1hp pump. So, in this case, you could easily use Hallmark Industries MA0414X-7A as it is a 1hp submersible well pump.

Hallmark Industries Well Pump Reviews at a Glance

Wayne RPP50 Cast Iron Sewage Pump

SUMMARY

Hallmark Industries MA0414X-7A is a deep well submersible pump. The material used in this pump is stainless steel and cast iron. It has 1 HP power, requires 230 volts to run. This deep well pump can be used in any well more massive than the 5-inch diameter. It is a 2 wire pump and has an additional ground wire. It provides 1 HP hermetically sealed, high-quality motor. This seal protects the motor from overheating and make it use less energy.

The motor shaft is made with stainless steel to ensure corrosion resistance. It has heavy-duty thermoplastic impellers, diffusers, and intake screens. It comes with a thermal protection switch and a built-in control box. The discharge is 1-1/4 inch NPT. The max head is 207 feet when no pressure is holding the tank. This pump comes with a built-in control box. It also has a built-in check valve.

Technical Details

The Hallmark Industries MA0414X-7A weighs around 26.6 pounds. It has a round shape and looks like a cylinder. The dimension of this product is 30 x 4 x 4 inches. The voltage requirement 230 volts. The flow rate is 33 GPM. Here is a summary of the specs of Hallmark Industries MA0414X-7A-

Weight: 26.6 pounds
Dimension: 30 x 4 x 4 inches
Shape: round
Voltage: 230 volt
Wattage: 750 watt
Horsepower: 1 HP
Max Head: 207 feet(no pressure in the well)
Discharge: 1-1/4”
Flow Rate: 33GPM max

Who should use Hallmark Industries MA0414X-7A?

We know that the max head of Hallmark Industries MA0414X-7A is 207 feet. But knowing that is not always enough. To buy a well pump, people should consider both well’s head and pressure setting. Here is a table showing the max head of the well differs at various pressure settings.

Pressure switch Setting Water Depth (Max Head)

No pressure setting

207 feet

20/40 psi

112 feet

30/50 psi

89 feet

40/60 psi

66 feet

You can easily decide if you need this pump or not by looking at this table. If the well’s head is below the max head of the pump on a specific pressure setting, this pump is for you. If the max head is less than your wellhead, you should consider a high horsepower well pump like MA0419X-12A.

Price

Hallmark Industries MA0414X-7A is inexpensive and moderately priced. It has high built quality and reasonable price to performance ratio. At the time of this review, Hallmark Industries MA0414X-7A is priced $145 on Amazon. The price is entirely justifiable with the performance you will be getting from it.

PROS

  • It comes with a built-in control box
  • Submersible design helps to keep the noise level low
  • Two-wire pumps and have an additional ground wire
  • Comfortably fits 5” or enormous well
  • High-quality UL approved motor
  • Motor shaft is made with stainless steel. So you do not need to worry about corrosion
  • Perfectly sealed ball bearing
  • Impeller provides high flow up to 33 GPM and 207 feet max head
  • The motor is hermetically sealed. So it has proper thermal protection against overheating issue
  • Comes with the thermal protection switch
  • Built-in check valve included
  • Hallmark industries provide a good user manual to decide if you need it or not
  • Has a long life expectancy
  • Made in the USA

CONS

  • It is not made for all users. You need to know if this pump is for you.
  • Top steel cap may build rust
  • It does not come with a pressure tank switch.
MODEL & ACCESSORY SPECS

Item Weight: 26.6 Pounds

Voltage: 230 Volts

Product Dimensions: 30 X 4 X 4 Inches

Model Number: MA0414X-7A

Conclusion

If you are looking for a deep well pump first, you should decide what types of pump you need. That depends on the well’s head and pressure setting. If your well fit all the criteria for using this pump, you can buy this pump without any worries.

This Hallmark Industries well pump review explained how you should choose the pump. Also explained why you should buy Hallmark Industries MA0414X-7A deep well pump. Hallmark Industries MA0414X-7A will last long enough, and you will be happy with the features and performance.

Show Buttons
Hide Buttons