Best Pool Cover Pump Review
Are you tired of protecting your pool from damages? If the answer to this question is yes, then this article is for you. Here we will review the best pool cover pumps available in the market currently.
People usually cover their pool to keep it free from dust and debris. But these pool covers collect water whether it rains, dew or the snow melts. Water on your pool cover may cause some annoying problems.
The dirty water mixed with dust and debris may fall into your pool. This defeats the whole purpose of using a pool cover. In the winter, the accumulated water may freeze. The sharp edges of cracked ice may tear your pool cover.
Water accumulation on the pool cover is the main reason behind the damaged pool cover. Pool covers are usually costly. So no matter what, you do not want to damage your pool cover.
To keep your pool clean and protect your pool cover from damage, you should invest some money on a pool cover pump.
A pool cover pump can help you to get rid of that water over your pool cover. It will increase the longevity of your pool cover and cleanness of your pool. For you, we have picked the best pool cover pumps you can buy without spending a fortune.
Check Top 10 Best Water Pump Reviews
All the pumps in this pool cover pump reviews are inexpensive, highly efficient pool cover pumps. We have chosen a wide variety of both automatic and manual pool cover pumps that may help you with your pool cover.
Little Giant APCP-1700 Automatic Swimming Pool Cover Pump
Little Giant APCP-1700 is an excellent choice for any swimming pool cover. It is an automatic submersible pump.
The pump uses a very responsive float switch. If the water level goes up beyond 2 inches, the pump starts automatically. The pump can remove a large volume of water accumulated due to rain. It can drain water with a lot of debris without damaging the pump.
This pump has a long 25 feet power cord. You can connect it with any standard 3/4 inch garden discharge hose. The side discharge of this pump is optimal for water removal. It can pump up to 500 gallons of water per hour.
The motor inside this pump is a low energy consuming 1/3 HP motor. It is a fully submersible pump, and the maximum head of this pump is 23 feet. The pump is more massive than other pool pumps. It weighs around 23 pounds. The pump works fine in cold weather.
Flow Rate: 500 Gph
Dimension: 11.8 X 12 X 9.5 Inches
Weight: 13 Lbs
Cord Length: 25 Feet
WAYNE WWB WaterBUG Submersible Pump
WAYNE WWB WaterBUG pump is a multi-purpose submersible pump. The pump has a compact, heavy-duty design. The pump is resistant to corrosion.
The multi-flo technology allows it to drain water from the top and the side. You can choose the appropriate discharge option according to your needs.
The top discharge is ideal for tight spaces like window wells and buckets. The side discharge will be useful for removing water from flat surfaces. This pump is manual. It is powerful enough to drain the water from most of the pool covers.
The pump has a 1/6 HP motor. It can discharge up to 1257 gallons of water per hour. The discharge outlet is a 3/4 inch brass outlet. It fits any standard garden hose. The product is small and weighs 8 pounds.
The multi-ring suction strainer removes water down to 1/16 inch. This suction is designed in a way that minimizes clogging for leaves and debris.
The product is made in the USA with many foreign and homemade parts. Though the pump is a little pricier, it is one of the most reliable pumps in the market.
Flow Rate: 1350 Gph
Dimension: 6 X 4 X 8 Inches
Weight: 8 Lbs
Cord Length: 10 Feet
Wayne 57729-WYNP WAPC250 Pool Cover Pump
Wayne 57729-WYNP WAPC250 Pool Cover Pump is the one best selling pool cover pump in the USA. This is an automatic submersible pool cover pump. Its iSwitch technology turns the pumps on and off automatically after detecting the standing water level in the pool cover.
The pump automatically activates when the water is above 2.125 inches and shut down when water is under 0.75 inches.
The pump can discharge up to 3000 gallons of water per hour at 0 feet. The impeller is protected by strainer base filters.
This prevents leaves and debris from clogging the pump. The motor is oil-free and has high efficiency. This pump uses a 1.25-inch discharge hose. It includes an adapter for a 3/4 inch garden hose.
The pool cover pump has a 25 feet cord. So the pump can easily reach the pool from your power outlet. The pump is slightly heavy but will not hinder the water removal process over the pool cover.
The pump has automatic freeze protection, which prevents damage to the pump during winter. The body of this pump is made from durable thermoplastic. The compact design, power, and all the other features make it one of the best automatic pool cover pumps.
Flow Rate: 3000 GpH
Dimension: 11.2 X 7.9 X 11.9 Inches
Weight: 10.56 Lbs
Cord Length: 25 Feet
Superior Pump 91250 Utility Pump
Superior Pump 91250 Utility Pump is a heavy-duty thermally protected pump. It has a 1/4 HP of highly efficient split capacitor motor. The pump can lift water up to 25 feet. It has a robust thermoplastic construction.
Thermoplastic protects the pump from rust and corrosion. It has a removable suction screen. This intake screen filter keeps out the debris from entering the impeller. It can collect up to 1/8 inch of solid. As this intake screen is removable, it is straightforward to clean.
The pump can discharge up to 1800 gallons of water per hour at 0 feet. At 20 feet, it can remove 540 gallons of water per hour. This pump has a 1-1/4 inch NPT discharge. It is compatible with a 3/4 inch garden hose. The power cord of this pump is 10 feet long.
The pump can be used manually and automatically. It can trigger automatic power by using a float switch. This pump can be used as a sump pump as well as a pool cover pump.
Max Flow Rate: 1800 Gph
Motor: 1/4 Hp
Dimension: 12 X 7 X 7 Inches
Weight: 6.8 Lbs
Mode: Manual and Automatic
FibroPool Electric Swimming Pool Winter Cover Drain Pump
FibroPool Electric Swimming Pool Winter Cover Drain Pump is an inexpensive yet powerful pump.
It has a perfect size and weight ratio. It is just 3.8 pounds. So it does not create any extra pressure on the pool cover. The pool pump can drain up to 600 gallons of water per hour. For most household pools, this flow rate is more than enough.
This pool pump is a manual pull pump. The cord length is 16 feet. The cord can be used in any standard 110V or 220V power outlet. This pool pump has enough power to drain water from any depth quite comfortably.
The casing of the pump is designed to be durable. The material of the housing is thermoplastic. That’s why it is resistant to rust. The pump is safe from accumulated water from rain or melting snow.
The price and performance make it one of the best swimming pool cover pump in this list.
Flow Rate: 600 Gph
Motor: 1/10 Hp
Dimension: 9.7 X 9.6 X 4.7 Inches
Weight: 3.8 Lbs
Cord Length: 16 Feet
Little Giant 500500 1-AA-18 Submersible Cover Pump
Little Giant 500500 1-AA-18 Submersible Cover Pump is a very lightweight compact pool cover pump. It has an epoxy coated die-cast aluminum housing with an inlet screen. It can remove up to 170 gallons of water per hour.
The cable is 18 feet long. Eighteen feet cable is good enough for most pool covers. The pump is the submersible only pump. This pump features a 1/4 inch MNPT discharge. It accepts 1/2 inch inner diameter tubing.
This pump lasts longer than most people expect. The little giant would sell all the replacement parts if you needed.
Max Flow Rate: 170 Gph
Dimension: 6 X 6 X 4 Inches
Weight: 2.83 Lbs
Cord Length: 18 Feet
Little Giant PCP550 14942702 Pool Cover Pump
Little Giant PCP550 Pool Cover Pump is a submersible pool cover pump from Little Giant. This pump can be used to remove standing water from pool covers.
The housing of this pump is made with the durable thermoplastic. Because of that, this pump is very lightweight. The weight of this pool cover pump is 3.45 pounds. It has a 25-inch cord. This long cord length and light, compact design makes it easier to move around while cleaning the pool cover water.
The motor is 1/4 horsepower and can remove up to 550 gallons of water at 0′. It can remove 400 gallons in 3′ lift.
Aside from eliminating pool cover water, it can also be used to move water from small reservoirs and containers. It has a 3/4 inch garden hose connection for easy installation. The pump is safe to use in the prolonged accumulation of rainwater or melting snow.
The pool cover pump is entirely submergible. It does not turn on if the water is not at least 2.5 inches deep. Aside from that, this pump is a perfect combination of power and price.
Max Flow Rate: 550 Gph
Motor: 1/4 Hp
Dimension: 7 X 7 X 5.5 Inches
Weight: 3.45 Lbs
Cord Length: 25 Feet
Yescom 1HP 3432GPH Submersible Dirty Clean Water Pump
Yescom 37PUM007-SUM750W-03 is one of the most potent pumps for pool cover you will ever find. This heavy-duty pump is very versatile and can be used as filters, fountain pumps, and even sump pumps.
The pump is an automatic submersible pump. It has built-in mechanical power on/off mechanism. The mechanical function works with the help of a float switch. This mechanism automatically shuts off the pump if it fails to pump any more water.
The pump has a very durable construction. The motor in this pump is a 1 HP motor. The motor is the oil-cooled electric motor.
This pump can drain the maximum of 3432 gallons of water per hour. The maximum head of this pump is 26 feet. The cable length of this submersible pump is 25 feet. The pump is bigger and heavier than most of the pumps in this list. It weighs around 13 pounds.
The pump is cheap compared to the other powerful pump in this list. It has a wide variety of use. It can be used to drain water from flooded areas. It can also be used to refill water in the pool, pond, or any reservoir tank.
Max Flow Rate: 3432 Gph
Motor: 1 Hp
Dimension: 16.5 X 9 X 8.6 Inches
Weight: 12.95 Lbs
Cord Length: 25 Feet
Blue Wave Dredger Jr. 350 GPH Above Ground Pool
Blue Wave Dredger Jr. pool cover pump has a lot of similarity with the Pump Away BS27316 pump. These two pumps look the same and have all similar features.
This pool cover pump can also pump up to 350 gallons of water per hour. It is a small, 1/4 HP submersible pump. It only weighs 2.85 pounds.
The pump is fully submersible. It can remove a very thin water level from 1/8 inches. It has a 25 feet long power cord. Twenty-five feet cord is more than enough to clean most of the pool.
At the bottom of the pump, it has a reusable foam inlet filter. This helps the pump to prevent clogging from leaves and debris. This pump is perfect as a winter pool cover.
This pump can also be used to remove standing water from the spa, basement, and boat. This is one of the cheapest winter pool cover pumps in the market.Blue wave is known as the one of the best winter pool cover pump.
Flow Rate: 350 Gph
Motor: 1/4 Hp
Dimension: 4.8 X 4 X 4 Inches
Weight: 2.85 Lbs
Cord Length: 25 Feet
Pumps Away 350 GPH Submersible Swimming Pool
Pumps Away 350 GPH Submersible Pump is a manual submersible swimming pool cover pump. This product is very compact and lightweight. It weighs around 2.7 pounds. Despite being a smaller pool cover pump, it can pump up to 350 gallons of water per hour. Though it is a submersible pump, it can also remove a very thin water puddle.
It can remove waters within 1/8 inch depth. The power cord is 25 feet long. This allows this pump to work flexibly and reach all the places of the small and medium-sized pool.
The pump has a standard hose adapter for simple installation and quick setup. The filter sponge under this pump is handy for preventing the leaves and debris from clogging the motor inside the pump.
The product is designed to be oil-free and environment friendly. It draws very little power. The motor is a 1/4 HP motor. These products save a lot of energy and are very easy for cleaning and maintaining.
Max Flow Rate: 350 Gph
Motor: 1/4 Hp
Dimension: 10 X 8 X 8 Inches
Weight: 2.7 Lbs
Cord Length: 25 Feet
Pool Cover Pump Buying Guide
The water pump market is flooded with lots of different types of pumps. Some pumps are quite versatile and can be used for a lot of applications.
Whereas some pumps are made for a particular reason. No water pump can do it all. No matter how much you look, you will never find any pump that has all the things you want or like. So before buying a pump for your pool cover, keep these following things in mind.
Types of pumps:
You will see both the manual and automatic pool cover pump available in the market. The manual pump is usually a cheaper lightweight pump. It is a good fit for the people who do not mind to manually switch the pump on for draining and off the pump after it finishes.
Automatic pumps, on the other hand, start on their own when the water level rises to a predetermined height. Automatic pumps are usually expensive.
GPH (Gallon Per Hour):
GPH means how many gallons of water the pump can remove in an hour. It indicates the flow rate of a pump.
Usually, more GPH means the faster removal of water. But if you are using a submersible pump, the GPH rating is generally given for water level close to 0 feet. The manufacturer provides a detailed GPH rating at a different height on the back of the label.
Cord length is another important thing you have to look for before buying a pool cover pump.
Always buy a pump that has enough cord length to reach from your power outlet to your pool. The ideal cord length will vary from people to people. You can see cord length from 10 feet to 25 feet in the most pumps. Be careful of the cord length before buying a pump.
Pump filter is one of the most necessary things when looking for a pool cover pump. Usually, the pool cover collects a lot of dust, leaves, and debris along with water. If you try to clean the water with some debris in it, the pump may get clogged and stop working.
To remedy this situation, most pool cover pump manufacturers use some sort of filter in their intake base. This filter helps the pump to work for a more extended period of time without getting clogged.
The construction of a pump varies on the manufacturer. The most common housing material is thermoplastic and cast iron or aluminum.
All of them are proven durable and can resist harsh weather. But the pump with the thermoplastic body is lighter than the aluminum or iron body pumps. Also, thermoplastic has no chance to get rust and is highly resistant to corrosion.
Durability and Longevity:
The Durability and longevity depend on both the product and the consumer. If the pump is used as directed, many pool cover pumps last for years. As long as the motor does not get clogged up, the pump is usually right to go.
Taking Care of Your Pool Cover Pump
After buying a pool cover pump, you should take care of it properly. Without proper maintenance, your pump may perform below expectations. Before using the pump, try to keep your pool cover free from any debris.
This debris may clog the pump and damage it permanently. Though many pool cover pumps come with some sort of filter base, sometimes it is not enough to prevent the debris. Clean your filter after use, and do not let any solid waste accumulate in your pump.
Another thing you should check before using it is its power and voltage requirement. Connecting to the wrong power outlet may kill the pump instantly. Do not overuse your pool cover pump and use it as it is directed by the manufacturer.
Frequently Asked Questions (FAQ)
Q. Should I pump water off the pool cover?
A: You should always remove the water from your pool cover. The water accumulated from the rain and storm may cause several problems. If you left those in the water, they would freeze.
The sharp edges from the ice may damage your pool cover. The same goes for a large amount of water over your pool cover. If the accumulated water and debris fall into your pool, the whole reason for covering your pool to protect your pool will be a failure.
Q. What does a pool cover pump do?
A: Pool pumps help you to remove any accumulated water over your pool cover due to rain, dew, or melting snow. This pump can remove those water away from your pool cover.
These water pumps do not let any water to store over your pool cover. They can even remove not such a deep water puddle. You can find both manual and automatic pool cover pump in the market.
Q. How do you pump water out of a pool cover?
A: It depends on how much water you currently have on your pool cover and what type of pump you have. If your pool cover collects a lot of water, direct all the water to the middle of the pool cover and then turn on the pool cover pump.
All of the pool pumps are submersible pumps. So they will not get damaged. If you want to remove a few water puddles where and there, place your pool pump over the puddle to pump the water out of the pool cover.
Q. Should the pool pump be covered in winter?
A: If the temperature is unstable and changes quite frequently, then you should protect your pump from the winter. That may cause rust, crack, and many problems. Aside from that, most pool pumps work fine during the winter or rainy seasons.
Q. How long do pool cover pumps last?
A: A well maintained pump lasts a little over that time. You can expect at least 3-5 years of services from these submersible pool cover pumps.
How do you pump water out of a pool cover?
A pool cover pump will undoubtedly help you to remove the accumulated water from your pool cover. The pool cover pump is the perfect solution to protect your pool cover during rain and when the snow starts to melt. But all pool cover pumps are not created equal.
A right pool cover pump will make the draining process smoother. It also makes the installation process and maintenance hassle-free.